Product Description
Pennine P33 ATEX Approved Fuel Flow Meter
The Pennine ATEX approved P33 fuel flow meter is designed for the measuring of dispensed Petrol, kerosene and Diesel in flammable environments. Able to measure up up 999.9 litres at a time and easy to install and calibrate, the ATEX approved P33 is a flexible Petrol and Diesel flow meter. These Pennine fuel flow meters can be implemented in either rigid or flexible pipe lines, or installed directly onto the pump.
Diesel, kerosene and petrol flow meter
Flow rate: 20-120lpm
Can be rotated to allow flow from 4 directions
1″ F x F BSP Inlet/Outlet
Nutating disk system
Accuracy +/-1% after calibration
3 digit resettable and 6 digit non-resettable totaliser
ATEX certified to 2 G IIB T=85°C (T6)
P33 Flow Meter 1″
The Pennine Pump & Tank P33 mechanical fuel flow meter measures the exact quantity of the dispensed Diesel fuel or oil (+/-2%) through a nutating disk system.
The P33 fuel flow meter measures up to 999.9 litres, and is reliable, inexpensive, and easy to install.
Thanks to their reduced flow resistance, these Pennine Diesel and oil flow meters can also perform well under gravity flow conditions.
There are separate models available specifically for Diesel fuel and oil use.
Available with 10:1 pulser for connection to fuel management system
Flow meter Flow rate: 20-120ltr Per Min
Front face can be rotated to allow fuel flow from 4 directions
Accuracy +/-2% with adjustable calibration
3 digit resettable and 6 digit non-resettable totaliser
Suitable for use with Diesel.
Max. pressure 142 psi (10 bar).
P44 1″ Flow Meter
The Pennine Pump & Tank P44 mechanical fuel flow meter uses a nutating disk system to accurately count how much Diesel fuel or oil has been transferred.
The P44 fuel flow meter is a cost effective solution to measuring the flow of fuel up to 9999.9 litres at a time.
As well as being suitable for pumping system, these Pennine Diesel and oil flow meters are also compatible with gravity fed systems.
There are versions of these fuel flow meters specially designed for both Diesel fuel and oil depending upon the users’ requirements.
Available with 10:1 pulser for connection to fuel management system
Flow meter Flow rate: 20-120ltr Per Min
Front face can be rotated to allow flow from 4 directions
1” F x F BSP Inlet/Outlet
Accuracy +/-2% with adjustable calibration
4 digit resettable and 8 digit non-resettable totaliser
Suitable for use with Diesel.
Max. pressure 142 psi (10 bar).
Series 900 Fuel Flow Meter
The Series 900 mechanical fuel flow meter is extremely reliable for accurately measuring (+/-2% after calibration) how much Diesel or Bio-Diesel (up to B30) has been dispensed, through the use of its nutating disk system.
This fuel flow meter can measure up to 9999 litres, and has an 8 digit non-resettable totaliser.
As well as being easy to install, the Series 900 Diesel flow meters are known for their reliability.
They can also be used in gravity flow systems if the minimum flow requirement of 23ltr per min is achieved.
Available with 10:1 pulser for connection to fuel management system
Diesel flow meter Flow rate: 23-151ltr Per Min
Front face can be rotated 90º
1 ½” F x F BSP Flanged Inlet/Outlet
Max. pressure 50 psi (3.5 bar).
4 digit register. 8 digit non resettable totaliser.
Fill-Rite Flow Meter & Strainer 1″
The Series 806 mechanical fuel flow meter is extremely reliable for accurately measuring (+/-2% after calibration) how much Diesel, Bio-Diesel (up to B30) or petrol has been dispensed, through use of its nutating disk system.
This fuel flow meter can measure up to 999 litres, and has an 8 digit non-resettable totaliser.
As well as being easy to install, these flow meters are known for their reliability.
This flow meter can also be used in gravity flow systems if the minimum flow requirement of 23ltr per min is achieved.
Available with 10:1 pulser for connection to fuel management system
Diesel flow meter Flow rate: 20-75ltr Per Min
Front face can be rotated 90º
Max. pressure 50 psi (3.5 bar).
3 digit register. 6 digit non resettable totaliser.
1” BSPF ports.
Accuracy of +/- 2% with adjustable calibration.
Integral inlet strainer, 400 micron.
Fill-Rite Flow Meter with Pulser 1″
The Series 807 mechanical fuel flow meter is extremely reliable for accurately measuring (+/-2% after calibration) how much diesel, Bio-Diesel (up to B30) has been dispensed, through use of its nutating disk system.
This fuel flow meter can measure up to 999 litres, and has an 8 digit non-resettable totaliser.
As well as being easy to install, these diesel flow meters are known for their reliability. These diesel flow meters can also be used in gravity flow systems if the minimum flow requirement of 23ltr per min is achieved.
Available with 10:1 pulser for connection to fuel management system
Diesel flow meter Flow rate: 20-75ltr Per Min
Front face can be rotated 90º
Max. pressure 50 psi (3.5 bar).
3 digit register. 6 digit non resettable totaliser.
1” BSPF ports.
Accuracy of +/- 2% with adjustable calibration.
